User manual

82
set framed_route user <
name
>
gateway
[ip_address]
ip_route
[ip_address]
metric
[number]
Specifies a framed (static) network to the user profile for dialup connections.
See add
framed_route user
and
add ip route
commands.
Parameters Description
<user name> User name specified for the framed network.
gateway IP address of the gateway used to reach this remote
network.
ip_route IP address of the remote network
metric Integer representing how far away the route is, in
“hops” from other routers. Values are 1 through 15.
set imodem interface <
interface_name
>
AT_COMMAND [
string
]
CALL_TYPE [
AUTO | CLEAR | INTERNET |
MODEMFAX | V110 | V120
]
DIRECTORY_NUMBER [
string
]
SPID [
string
]
SWITCH [
ATT | DMS100 | NI1 | NI2
]
TERMINAL_ENDPOINT_ID [
string
]
Specifies the following ISDN modem settings. Use the
show interface
command to retrieve these settings. See table on next page.