User manual

74
Parameters Description
primary_server Initial server to send the accounting information to,
unless use_servers is set to BOTH, in which case both
servers will be sent to.
secondary_server Second server to send the accounting information to,
unless use_servers is set to BOTH, in which case both
servers will be sent to.
retransmissions Sum of retransmissions to 1 or both servers (if needed),
depending on value of use_servers. Default: 100.
start_time When accounting begins. You may choose either:
• Authentication
- session time in number of
seconds after user name and password entered.
• Connection
- session time in number of seconds
from modem pickup.
timeout Interval between retransmissions. Default is 5 seconds.
use_servers Retransmission algorithm used for accounting.
• ONE
- second server is a backup (default)
• BOTH
- both servers are sent to, until a
response is heard from both servers.
set appletalk
{ allow_password_change [
TRUE | FALSE
] }
{ arap [
ON | OFF
] }
{ arap_node_network_range [
number-number
] }
{ arap_zone [
string
] }
{ force_manual_password_entry [
TRUE | FALSE
] }
{ max_arap_nodes_reserved [
number
] }
{ max_arap_sessions [
number
] }
{ max_compressed_arap_sessions [
number
] }
{ max_forwarding_table_size [
number
] }
{ max_password_length [
number
] }
{ max_routing_table_size [
number
] }
{ min_arap_nodes_reserved [
number
] }
{ min_password_length [
number
] }
{ password_retries [
number
] }
Sets AppleTalk parameters. See table on next page.