User manual

CLI Reference Guide 73
RLOGIN
rlogin <
ip_name_or_address
>
login_name [
login_name
]
TCP_port [
number
]
Creates an
rlogin
client connection to the specified host.
Parameters Description
<ip_name_or_address> Either the IP address in nnn.nnn.nnn.nnn notation,
or the host name of the remote system.
login_name User name needed to login to the remote system.
TCP_port TCP port number to create the connection to. By
default, 513 is used.
SAVE
save all
Saves all changes made during your CLI session. We recommend saving your
changes frequently, just as you would with any type of editor.
SET
set accounting
primary_server [
IP_address
]
retransmissions [
count
]
secondary_server [
IP_address
]
timeout [
number_seconds
]
start_time [
authentication | connection
]
use_servers [
ONE | BOTH
]
Configures the remote (RADIUS) accounting retransmission algorithm. Use
show accounting
to check these values. See table on next page.