User manual

CLI Reference Guide 71
PING
ping <
ip_name_or_addr
>
output [
output_filename
]
count [
count
]
interval [
interval
]
timeout [
timeout_value
]
Sends an ICMP echo request to a remote IP host.
Parameters Description
<ip_name_or_address> IP address in dotted notation, or host name of
remote system.
output A file name to direct output to.
count Number of ICMP echo requests to send.
interval Seconds to wait between sending each request.
timeout Seconds to wait for an echo response to return.
QUIT
quit
Leave the CLI, but keep this connection open. This command returns you to
the Dial-In User or TELNET commands.
REBOOT
reboot
Reboots the system. If you have made any configuration changes, be sure to
save all
before rebooting. Also see the
delete configuration
command.