User manual

70
list tftp clients
Displays IP addresses of all users allowed to use the Trivial File Transfer
Protocol (TFTP) to connect to the system. You must have used
add network
service
to add TFTP support to the system and used
add tftp client
to authorize
users to connect.
list udp listeners
Displays User Datagram Protocol (UDP) ports being used by the system.
These ports correspond to processes which are receiving UDP data (for
example SNMP, User Management, TFTP service). Local IP addresses and
port numbers are listed for each UDP port.
list users
Lists all users, showing:
• User Name
- user designation you specified using
add user
• Login Service
- TELNET, RLOGIN, or ClearTCP
• Network Service
- type of network service: PPP, ARAP, SLIP
• Status
- link status: ACTIVE, INACTIVE or DISABLED
• Type
- type of user: see the
add user
command for options
LOGOUT
logout
Leave the CLI and close this connection. This ends the dial-in user’s or
TELNET session.
PAUSED COMMANDS
More (or CR) Continue printing
Quit Cancel rest of output