User manual

CLI Reference Guide 69
list snmp communities
or
list snmp trap_communities
These commands display the defined SNMP communities, which you
previously defined using the
add snmp community
command.
SNMP
trap_communities
does not list access.
• Community Name
- community designation for the IP address
• IP address
- IP address of a member of the community
• Access privelege (R/W)
- type of access a member has to MIBs
list syslogs
Displays IP addresses which get syslog entries from the system. See
add
syslog
for more information, and
delete syslog
command to remove entries.
This command shows:
• Syslog
- IP address to which syslog entries will be sent
• Log Level
- reporting level of entries to send
• Msg Count
- current number of messages sent since system bootup
Compare with
list facilities
and
set facilities
commands, which control what
gets output to the console port.
list TCP connections
Displays information about all TCP connections. Connection status is defined
in RFC-793.
• Local Address
- IP address of the local host for this connection
• Local Port
- TCP port number used by the local connection
• Remote Address
- IP address of the remote host for this connection
• Remote Port
- TCP port number used by the remote connection
• Status
- status of the connection. E.g.:
Listen