User manual

66
• Metric
- number of hops through routers to reach this service
list ipx static routes
Displays all IPX static routes previously defined using
add ipx route
.
• Network Addr
- network address requiring this route
• NextHopNIC
- network address of the next router in the routing path
• Gateway
- address of the host you defined as the gateway
• Metric
- number of routers a packet must pass through to get to gateway
• Ticks
- delay, in ticks, to reach the route’s destination
list lan interfaces
Displays the installed interface - Ethernet (eth:1), along with its operational
status, administration status, and interface index. If the interface is down under
Admin Status, you can use
enable interface
to try to bring it up. The command
lists:
• Index
- number used to identify the interfaces position in the table
• Name
- interface name:
eth:1
• Oper Status
- current, operating status of the interface; UP or DOWN
• Admin Status
- administrative status you designated interface to be, up or
down.
list login_hosts
Displays currently defined entries in the Login Host Table which you
previously defined using
add login_host
. Values displayed are:
• Preference
- preference (priority) number assigned to the host
• Name
- name you assigned the login host
• Port
- Rlogin, TELNET, and/or ClearTCP TCP port numbers assigned to
that login host