User manual

CLI Reference Guide 65
list ipx networks
Displays the IPX networks that you previously defined using the
add ipx
network
command. It lists:
• Name
- designation you assigned this network
• Prot
- protocol; always IPX
• Int
- interface each IPX network runs on
• State
- ENABLED or DISABLED
• Type
- STATIC or DYNAMIC
• Network Address
- network address of this IPX network
list ipx routes
Displays IPX routes you previously defined using the
add ipx route
command,
plus the defined IPX nodes, including any IPX routes learned via RIP. It lists:
• Network Addr
- network address of this route
• Prot
- protocol used to find this route: LOCAL, RIP, STATIC, NLSP,
OTHER
• NextHopNIC
- network address of the next router (the next hop to the
destination), or the MAC address for the local IPX nodes (on the LAN)
• Gateway
- address of the gateway to this network
• Metric -
# of hops through routers this network is distant from
• Ticks
- estimated interval in eighteenth’s of a second for packet delivery
to the remote network.
list ipx services
Displays IPX services. It lists:
• Name
- name of the IPX service
• NetNum
- network number that the service is on
• Node
- name of the IPX node running the service
• Socket -
socket number of the service
• Type
- service type in hexadecimal format
• Prot
- protocol used to find this service: SAP, LOCAL, NLSP, STATIC
or OTHER