User manual

CLI Reference Guide 63
list interfaces
Displays the installed interfaces, along with their operational status,
administration status, and interface index. If an interface is down under Admin
Status, you can use
enable interface
to try to bring it up. The command lists:
• Index
- number used to identify the interfaces position in the table
• Name
- interface name:
eth:1
• Oper Status
- current, operating status of the interface; UP or DOWN
• Admin Status
- administrative status you designated interface to be, up or
down. For modem interfaces, Oper Status will be up only if the modem is
connected.
list ip addresses
Displays the IP address for each interface. It lists:
• Address
- IP address of the interface
• Bcast Algo
- broadcast algorithm used
• Reassembly Max Size
- maximum allowable size of packet that can be
reassembled from a fragmented packet
• Interface
- interface this IP address uses to connect to the system
list ip arp
Displays the contents of the ARP cache. It lists:
• IP Address
- network address for this entry
• Phys Address
- MAC address that the IP address maps to
• Type
- interface type: Ethernet or Token Ringor Dynamic
• IfName
- interface name:
eth:1