User manual

CLI Reference Guide 59
list active interfaces
Displays the operational status, administration status, index and name of all
active interfaces. The output is the same as the
list interfaces
command,
except non-active interfaces are not displayed. Inactive interfaces are
interfaces with no current connections.
list appletalk forwarding
Displays the entries in the AppleTalk Forwarding Table. The table lists:
• Network Address Range
- AppleTalk network address range
• NextHop
- address of next hop router; 0.0 implies entry is a local network
• Protocol
- always RTMP
• Modified Time
- time the entry was last modified
• UseCount
- number of times this entry has been used
• Port
- port number
list appletalk networks
Displays AppleTalk networks configured by the
add appletalk network
command. The table lists:
• Name
- AppleTalk network name
• Prot
- protocol - always APPLETALK
• Int
- interface this network uses
• State
- possible states are:
INITIALIZING
CONFIGURING
ENABLING
ENABLED
DISABLING
DISABLED
INVALID
TERMINATING
• Type
- STATIC or DYNAMIC
• Network Address
- address range of this entry