User manual

CLI Reference Guide 55
enable modem_group <
name
>
Enables the modem group you disabled with the
disable modem_group
command. The modem group
All
is provided as a default modem group with
all NETServer (8 or 16) modems included. See also the
set modem group
command, which configures all interfaces in the modem group.
enable network service <
service _name
>
Enables the network service that you previously defined with the
add network
service
command. You can see which services are currently defined and their
state using
list network services
.
enable security_option snmp user_access
Allows SNMP access to the User Table. This lets remote users use SNMP to
access the CLI and reconfigure the NETServer. You can use
show
security_options
to see the current security values.
enable security_option remote_user administration
Allows CLI access by remote TELNET and dial-in users. CLI configuration
can be done from the console port and by remote users. You can use
disable
security_option remote_user administration
or
disable security_option snmp
user_access
to restrict CLI access to the console port only.
enable snmp authentication traps
Informs SNMP to send traps for both local and remote authentication. You can
use
show snmp
to see the current setting.