User manual

52
ENABLE
enable accounting
Enables remote accounting via RADIUS. Use
disable accounting
to disable
accounting via RADIUS.
enable security_option remote_user administration
Enables remote TELNET users to access the CLI. This prevents remote users
from modifying the configuration. You can use
enable security_option
remote_user administration
to re-enable full TELNET access.
enable appletalk network <
network_name
>
Enables a previously defined AppleTalk network. You must have defined
zones for this network, using the
add appletalk zone
command, before you can
enable the network.
enable authentication local
Enables user authentication using the passwords specified in the User Table.
When you issue the
add user command
, you must enter a password for local
authentication to use. If there is no password, and remote authentication is not
enabled, the user will not be able to establish a connection. You can use
show
authentication
to see which authentication schemes are in use.
enable authentication remote
Enables remote (RADIUS) authentication. Local authentication takes
precedence over remote authentication. You can use
show authentication
to
see which authentication schemes are in use.