User manual

disable modem_group <

name

Disables the modem group you enabled with the

enable modem_group

command.

disable network service <

service_name

Disables a network service, such as TELNET or TFTP. If

close_active_connection

was specified as

TRUE

in the

add network_service

command, then all active connections are closed when the server is disabled.

disable security_option snmp user_access

Turns off SNMP access to the CLI. This prevents remote users from using

SNMP and possibly damage the configuration. You can use

enable

security_option snmp user_access

to re-enable full SNMP access.

disable security_option remote_user administration

Disables CLI access to remote TELNET and dial-in users. All CLI

configuration must be done from the console port. You can use

enable

security_option remote_user administration

to re-enable remote CLI access.

disable snmp authentication traps

Instructs SNMP to stop recording trap information for user (either local or

remote) authentication.

disable telnet escape

Disables the TELNET escape character for all TELNET clients. When

disabled, TELNET clients who hit the escape character during their session

will not get a local TELNET command line.