User manual

CLI Reference Guide 47
delete user <
name
>
Deletes a user you previously added to the Local User Table. Use
list users
to
see the currently defined user, and
show user
to see the attributes you assigned
to that user using the
add user
or
set user
command.
DIAL
dial <
user_name
>
Generates an outgoing call to the location specified by the user name. You can
use
list users
to list the defined users, along with the services they are defined
to work with, and their current status. Maximum 32 characters allowed.
DISABLE
disable accounting
Disables remote accounting via RADIUS. You can use
show accounting
to see
if it is currently running, and
enable accounting
to start accounting.
disable appletalk network <
name
>
Disables the specified AppleTalk network. A disabled network remains in the
Network Table, but cannot receive or send data. Use
list appletalk networks
to
see the currently defined AppleTalk networks and their status.
disable authentication local
Disables user authentication using the passwords stored in the Local User
Table. You specified passwords when using the
add user
or
set user
commands, which are used to authenticate users trying to establish a
connection. You can use
show authentication
to see if remote and/or local
authentication is currently enabled.
Users can still be authenticated using remote authentication (RADIUS), if you
have enabled it.