User manual

ARP

arp <

ip_name_or_addr

output [

outputfile_name

]

Prints the IP address (and Media Access Control Address [MAC] if on a

locally connected network) of a network node to a file in FLASH or the CLI

(default). If a node is not in the ARP cache, an ARP request will be sent out.

Parameters Description

<ip_name_or_addr> IP address or node name for the IP and MAC address

you seek.

ASSIGN

assign interfaces <

interface_name,interface_name,…

modem_group <

group_name

Adds interfaces to an existing modem group or modem groups.

Parameters Description

interface name Interface names to be assigned to the modem group. The

Interface Name must exist in the Interface Table. Interface

names can be individual names, or ranges. A range must be

in the format mod:[1-9].

modem_group Name of modem group.

BYE

bye <

interface_name

Leave the CLI, but keep this connection open. This command returns you to

the Dial-In User or TELNET commands.

COPY

copy file

Copies a file within the FLASH file system. This is a flat file system.