User manual

CLI Reference Guide 37
Parameters Description
<service_name> Name of this type of service. Limit of 32 character
ASCII string.
server_type Designates the type of service being offered. Services
currently available are:
• ClearTCPD
- enables access to a modem group
• DialOut
- for dial-out connections to IP or IPX
hosts
• SNMPD
- SNMP agent
• TFTPD
- server for file transfers
• TELNETD
- TELNET server, either to the CLI
or a modem group
socket The port the server listens on. For TFTP, TELNET and
CLEARTCP, it is the TCP or UDP port number.
Socket numbers are the joined sender’s (or receiver’s)
IP address and service type’s port number.
enabled Optional. Indicates whether the network is enabled
(YES) or disabled (NO). When you add a network
service, it is
disabled
by default. Within the command,
be sure to add the enable value
after
any data value.
data Ancillary Data. This field contains server-specific
configuration data. See the table on the next page for
configurable ancillary data parameters for TELNET.
close_active_
connections
Indicates whether or not to close any active
connections when a service is disabled by the disable
network_service command. The default is
FALSE
.
The table on the next page shows the configurable parameters for the TELNET
services, which are specified with the data parameter.