User manual

36
add modem_group <
group_name
>
interfaces [
interface_name,interface_name…
]
Creates a modem group and assigns interfaces to the modem group. See also
the
set modem group
command, which configures all interfaces in the modem
group. You can also add additional interfaces to this modem group using
assign interface
, and remove them with
unassign interfaces
. The modem
group
All
is provided as a default modem group with all NETServer (8 or 16)
modems included.
Parameters Description
<group_name > Name of the modem group, up to 32 characters. We
recommend you limit the length of this name to eight
characters. That will ensure the name will always display
completely in certain list and show commands
interfaces List of interfaces to be assigned to the modem group. The
expected format is ssss,ssss,ssss... where the Interface
Name must exist in the Interface Table. Interface names
can be individual names, or ranges. A range must be in
the format mod:[1-9].
add network service <
service_name
>
server_type [
server_type
]
socket [
socket_number
]
enabled [
yes | no
]
data [
“string”
]
close_active_connections [
TRUE | FALSE
]
This configures a network listener process that provides a certain type of
service. To see the available server types, use the
list available servers
command. See table on next page.