User manual

142
VERIFY
verify filter <
filter_name
>
Verifies the syntax of a filter file, which has been previously
add
ed to the
table. If you update a filter file and TFTP it to the FLASH file system, and the
file already exists in the Filter Table, then you use this command to verify the
files syntax. You can use
list filters
to see which files are currently in the Filter
File Table, and what the status of each is.
Dial-in User Commands
TELNET commands are available to users who dial in, and whose
type
is
login
(type parameter in
add user
), and whose
host_type
is
prompt
(host_type
parameter in
set login user)
.
connect <
ip_name_or_addr
>
Connects a dial-in user to the specified IP host.
exit
Logs you out of your login session.
help
Displays the available Dial-in User commands.
logout
Logs you out of your login session.