User manual

138
OUTPUT COUNTERS
• Packets
- sum of SNMP packets transmitted
• Too Big Errors
- sum of SNMP PDUs generated by SNMP and for
which the value of the error-status field is `tooBig
• No Such Name Errors
- sum of SNMP PDUs generated by SNMP and
for which the value of the error-status field is `noSuchName'
• Bad Value Errors
- sum of SNMP PDUs generated by SNMP and for
which the value of the error-status field is `badValue'
• General Errors
- sum of SNMP PDUs generated by SNMP and for
which the value of the error-status field is `genErr'
• Get Request PDUs
- sum of SNMP Get-Request PDUs sent from SNMP
• Get Next Request PDUs
- sum of SNMP Get-Next PDUs sent from
SNMP
• Set Request PDUs
- sum of SNMP Set-Request PDUs sent from SNMP
• Get Response PDUs
- sum of SNMP Get-Response PDUs from SNMP
• Trap PDUs
- sum of SNMP Trap PDUs sent from SNMP
show snmp settings
Displays SNMP settings, which you can modify using
enable
or
disable snmp
authentication traps
commands.
• Authentication Traps
- ENABLED (default) or DISABLED
show system
or
show system settings
Displays system information.
• System Descriptor
- for example:
USRobotics Total Control NETSERVER V1.0.0, Built on Oct 31
1996 at 11:33:05.
• Object ID
- identifies this system to SNMP managers
• System UpTime
- time the system has been running since last boot
• System Contact
- name of person responsible for system. Modify using
set system
command
• System Name
- modify using
set system
command