User manual

CLI Reference Guide 137
show snmp counters
Displays many SNMP statistics.
INPUT COUNTERS
• Packets
- number of SNMP packets received
• Bad Versions
- SNMP messages for an unsupported SNMP version
• Bad Community Names
- SNMP messages which used an unknown
SNMP community name
• Bad Community Uses
- SNMP messages which represented an SNMP
operation not allowed by the SNMP community named in the message
• ASN.1 Parse Errors
- sum of ASN.1 or BER errors
• Too Big Errors
- SNMP PDUs for which the value of the error-status
field is `tooBig'
• No Such Name Errors
- SNMP PDUs where error-status field is
`noSuchName'
• Bad Value Errors
- SNMP PDUs where error-status field is `badValue'
• Read Only Errors
- SNMP PDUs where the error-status field is
`readOnly'
• General Errors
- SNMP PDUs where the error-status field is `genErr'
• Total Request MIB Objects
- sum of MIB objects retrieved successfully
as the result of receiving valid SNMP Get-Request and Get-Next PDUs
• Total Set MIB Objects
- sum of MIB objects altered successfully as the
result of receiving valid SNMP Set-Request PDUs
• Get Request PDUs
- sum of SNMP Get-Request PDUs accepted and
processed
• Get Next Request PDUs
- sum of SNMP Get-Next PDUs accepted and
processed
• Set Request PDUs
- sum of SNMP Get-Next PDUs accepted and
processed
• Get Response PDUs
- sum of SNMP Get-Response PDUs accepted and
processed
• Trap PDUs
- sum of SNMP Trap PDUs accepted and processed