User manual

136
show ppp
or
show ppp settings
Displays global settings for PPP. You can modify DIAL-IN Users
Authentication using the
set ppp receive_authentication
command. Modify
system transmit authentication name using
set system
command.
• DIAL-IN Users Authenticate PAP or CHAP
- Choices are:
CHAP, PAP, EITHER or NONE.
EITHER
is the default
• System Transmit Authentication Name
- remote account keyword used
by PPP at the datalink layer for WAN connections
show security_option
or
show security_option settings
Displays status for SNMP User Access and Administration by Remote Users.
You can modify the SNMP User Access using the
enable
or
disable
security_option snmp
commands. You can modify Administration by Remote
User using the
enable
or
disable security_option remote_user
commands.
• SNMP User Access
- ENABLED (default) or DISABLED
• Administration by Remote User
- ON (default) or OFF