User manual

134
SETTINGS for PPP LINK
• Operational Status
-
opened
or
not opened
• Interface Index
- index number of the interface used
• Local MRU
- MRU the remote entity uses when sending packets to local
PPP entity. Default: 1514
• Remote MRU
- MRU the local entity uses when sending packets to
remote PPP entity, default is 1514
• Local to Peer ACC Map
- value of the ACC Map used for sending
packets from the local PPP entity to the remote PPP entity
• Peer to Local ACC Map
- ACC Map used by the remote PPP entity
when transmitting packets to the local PPP entity
• Local To Remote Protocol Compression
- Indicates whether the local
PPP entity will use Protocol Compression when transmitting packets to
the remote PPP entity, ENABLED is the default
• Remote To Local Protocol Compression
- Indicates whether the remote
PPP entity will use Protocol Compression when transmitting packets to
the local PPP entity, ENABLED is the default
• Local To Remote ACC Compression
- Indicates whether the local PPP
entity will use Address and Control Compression when transmitting
packets to the remote PPP entity, ENABLED is the default
• Remote To Local ACC Compression
- Indicates whether the remote
PPP entity will use Address and Control Compression when transmitting
packets to the local PPP entity, ENABLED is the default
SETTINGS for PPP LINK AUTHENTICATION
• Operational Status
-
not opened
or
opened
• Local To Remote Compression Protocol
- authentication protocol used
by the local PPP entity when it authenticated the itself to the remote PPP
entity, PAP is the default
• Remote To Local Compression Protocol
- authentication protocol used
by the remote PPP entity when it authenticated the itself to the local PPP
entity , PAP is the default