User manual

CLI Reference Guide 133
show network <
name
> settings
Displays the configured settings for the specified network. The display varies
depending on the type of network specified.
show network <
name
> counters
Displays the statistical counters for the specified network. The display varies
depending on the type of network specified.
show ppp on interface <
name
> settings
Displays PPP settings on the specified WAN interface when interface is active.
SETTINGS for PPP BUNDLE 1
• Operational Status
-
opened
or
not opened
• Number Active Links
- number of links active on this PPP bundle
• User Profile
- user whose parameters were used in creating links
• Local MMRU
- MRU the remote entity uses when sending packets to
local PPP entity. Default: 1514
• Remote MMRU
- MRU the local entity uses when sending packets to
remote PPP entity. Default: 1514
• Local Endpoint Class
- type of address used as the identifier
• Local Endpoint Length
- maximum length of the local Endpoint
Discriminator Address, default is 6
• Local Endpoint ID
- value of the local Endpoint Discriminator Address
• Remote Endpoint Class
- value of the remote Endpoint Discriminator
Class, which indicates the type of address being used as the identifier
• Remote Endpoint Length
- maximum length of the remote Endpoint
Discriminator Address
• Remote Endpoint ID
- value of remote Endpoint Discriminator Address
SETTINGS for PPP BUNDLE 1 COMPRESSION
• Operational Status
-
Opened
or
Not Opened
• Compression Protocol
- authentication protocol used by the local PPP
entity when it authenticated the local PPP entity to the remote PPP entity:
PAP, CHAP or NONE