User manual

130
show ipx network <
network_name
> counters
Displays statistics for the specified IPX network.
• RIP Out Packets
- sum of RIP packets transmitted
• RIP In Packets
- sum of RIP packets received
• SAP Out Packets
- sum of SAP packets transmitted
• SAP In Packets
- sum of SAP packets received
show ipx network <
network_name
> settings
Displays parameter settings for the specified IPX network. You can modify
most of these values using the
set ipx network
command.
• Interface
- interface this IPX network uses
• Network Address
- network address of this IPX network
• Frame Type
- frame type used by the interface (ETHERNET II or SNAP)
• Maximum Packet Size
- maximum allowable packet size for this IPX
network. Default is 1500.
• Status
- operational state of the network
• Network Delay (ticks) -
time in number of ticks it takes to reach this IPX
network
• Network Learning Retries
- number of times this network will resend
packets to discover its directly connected neighbors
• Diagnostics
- sending of diagnostic packets ENABLED or DISABLED
• NetBIOS
- support ENABLED or DISABLED
• NetBIOS Name Caching
- support ENABLED or DISABLED
• NetBIOS Cache Timer (sec)
- interval a NetBIOS system will be kept in
the cache
• NetBIOS Maximum Hops
- most hops this network will make to locate a
NetBIOS system
• RIP State
- status ENABLED or DISABLED
• RIP Pace
- fastest pace, in packets per second, at which RIP packets may
be sent on this circuit (
not settable via the CLI
)
• RIP Update (sec)
- number of seconds to wait before aging out RIP
entries
• RIP Age Multiplier
- number to multiply the rip_update_interval by, to
obtain the value for aging out the entries in the RIP database