User manual

128
show ip network <
network_name
> settings
Displays parameter settings for the specified IP network. See the
set ip
network
command on page 85 for additional details.
• Interface
- interface this IP network runs on
• Network Address
- network address of this IP network
• Frame Type
- frame type used by the interface
• Mask
- subnet mask used by this IP network
• Station
- station address of this IP network
• Broadcast Algorithm
- broadcast algorithm used for this network
• Max Reassembly Size
- maximum packet size allowed to be reassembled
from fragments
• IP Routing Protocol
- routing protocol used
• IP RIP Routing Policies
- routing policies used by RIP
• IP RIP Authentication Key
- text string used for RIPv2 authentication
• Status
- ENABLED, ACTIVE, INACTIVE, DISABLED
show ip routing settings
Displays parameter settings for the specified IP network. Statistics are
gathered from parameters configured by the
set ip routing
command.
• IP Router Administrative Status -
whether status is enabled or not
• IP Static Remote Routes -
whether static routes are enabled or not
• LAN Host Address
- IP address of Ethernet host
• IP Autonomous System Number
- system number assigned
• IP Max Table Size
- maximum number of IP Routing Table entries
• IP Max Metric Entries
- maximum metric entries allowed
• IP RIP
- whether RIP is enabled on not
• IP Number RIP Interfaces
- number of RIP interfaces
• IP Number RIP Neighbors
- number of IP RIP neighbors
• IP RIP Flags
- type of IP RIP flags enabled