User manual

CLI Reference Guide 123
• Destination Unreachable
- sum of these messages sent
• Time Exceeded
- sum of these messages sent
• Parameter Problems
- sum of these messages sent
• Source Quench
- sum of these messages sent
• Redirects
- sum of these messages sent
• Echos
- sum of ICMP Echo (request) messages sent
• Echo Replies
- sum of these messages sent
• Timestamps
- sum of these messages sent
• Timestamp Replies
- sum of these messages sent
• Address Masks
- sum of these messages sent
• Address Mask Replies
- sum of these messages sent
• Advertise
-
show icmp settings
Displays incoming login-access information including logged ICMP packets.
show imodem interface <
name
> settings
Displays the Current Modem Configuration screen (ATI12 command)
followed by the Switch Settings Screen (ATI4 command):
U.S. Robotics Total Control MP I-modem with ISDN/V.34 ISDN Switch
Settings...
Switch Protocol *W 2 US National ISDN-1
Multipoint *M 1 Multi-point
Dialing Mode
SPID *S1 84755511110111 <-SPID1
*S2 84755511120111 SPID2
Directory No. *P1 5551111 <-DN1
*P2 5551112 DN2
TEI *T1 00 Automatic TEI
*T2 00 Automatic TEI
Physical Interface: Active
Data Link Layer : Active
OK