User manual

116
show authentication settings
Displays the RADIUS and local User Authentication Settings, which you can
modify using the
set authentication
command.
AUTHENTICATION SETTINGS
• Local Authentication is
- ENABLED or DISABLED
• RADIUS Authentication is
- ENABLED or DISABLED
• Primary Server is
- IP address of the primary RADIUS server
• Primary Server Port is -
Port # of the primary RADIUS server
• Secondary Server is
- IP address of the secondary RADIUS server
• Secondary Server Port is -
Port # of the secondary RADIUS server
• Retransmission Timeout
- interval between retransmissions
• Max Retranmissions
- number of retransmissions before failure reported
show clearTCP
or
show clearTCP settings
Displays the clearTCP
connected
message. It can be modified using the
set
clearTCP connected_message
command.
show command
or
command settings
Displays the settings for Command History Depth, Current and Local Prompt,
Login Required and Idle Timeout. See
set command [parameter]
to modify.
Prompts can hold a maximum of
64
characters. For example:
COMMAND SETTINGS:
History Depth: 10
Global Prompt: NETServer>
Local Prompt: NETServer>
Console Login Required: NO
Console Idle Timeout: 5
Current Idle Timeout: 0