User manual

CLI Reference Guide 115
show appletalk network <
name
> settings
Displays the settings for the specified network.
• Interface
- interface this Appletalk network runs on
• Address Range
- address of this network
• Frame Type
- encapsulation type
• Description
- additional information about network
• Status
- ROUTING
• Node Address
- network node number the router obtained on this network
• Desired Node Address
- configured network node number
• Current Zone
- zone the router is registered in
• Default Zone
- default zone name for the network
• Seed Router
- network router with network number built into its port
descriptor
• Network Learned From
- address of the node that the network
information was learned from.
• Zone Garnered From -
default zone from which AT zone list info is
gathered
• Send DDP Checksums -
DISABLED (default) or ENABLED
• AARP Gleaning -
ENABLED (default) or DISABLED
ZONES
• Name
- the name of each zone
• Status
- VALID or INVALID
show authentication counters
Displays the RADIUS and local User Authentication counters.
AUTHENTICATION COUNTERS
• Local Successful Authentications
- # of times user/password pair
matched
• Local Failed Authentications
- # of times user/password pair didn’t
match
• Remote Successful Authentications
- # of times RADIUS OK’d user
• Remote Failed Authentications
- # of times RADIUS rejected user