User manual

CLI Reference Guide 113
show appletalk settings
Displays the settings for AppleTalk, which you can modify using the
set
appletalk
command.
• ARAP
- Setting this parameter to ON allows users to connect remotely
over a phone line using ARAP client software.
• Max ARAP Sessions
- Maximum number of ARAP connections allowed
at one time.
• Max Compressed ARAP Sessions
- Maximum number of ARAP
connections using compression allowed at one time. Compressed sessions
are faster, but use more CPU because the compression is done in software
instead of in the modem.
• ARAP Zone
- Zone the ARAP user will appear in.
• ARAP Node Net Range
- Range of network numbers for ARAP users.
• Max ARAP Nodes Reserved
- Maximum number of ARAP connections
reserved for use. ARAP node numbers are reserved ahead so that a remote
user does not have to wait for a node to be negotiated with the network.
• Min ARAP Nodes Reserved
- Minimum number of ARAP connections
reserved for use. ARAP nodes are reserved ahead so that a remote user
does not have to wait for a node to be negotiated for.
• Allow ARAP Password Change
- Set to TRUE if the ARAP user can
change the password.
• Max Password Length
- Maximum length of password for ARAP client.
• Min Password Length
- Minimum length of password for ARAP client.
• Number of ARAP Password Retries
- Number of times an ARAP user
can retry typing in the password.
• Force Manual ARAP Password Entry
- Setting this parameter to TRUE
forces the user to enter a password when connecting via ARAP.
• Max Routing Table Size
- Limit of Routing Table entries allowed. This
number can increase with more memory in the system
• Max Forwarding Table Size
- Limit of Forwarding Table entries
allowed. This number can increase with more memory in the system.