User manual

110
Parameters Description
<user name> Name user, previously defined using add user
with network as the type.
channel_decrement When the line usage of the second channel
drops below this point, PPP will drop to the
first channel only. Default:
20 %
channel_expansion When the line usage of the first channel exceeds
this percentage, PPP will add the second
channel into communications. Specifying 100%
here disables the second channel for multilink
PPP. Default:
60 %
compression_algorithm Specifies the proprietary compression algorithm
PPP uses. Default:
AUTO
expansion_algorithm Specifies which type of expansion algorithm to
decompress incoming PPP data.
• CONSTANT
- best for constant
datastreams, such as file transfer
• LINEAR
- best for bursty traffic, such
as interactive users.
DEFAULT
max_channels Sets how many channels you can use. The
actual number of channels is determined by the
channel_decrement and channel_expansion
parameters. One channel disables multilink
PPP. Default:
1
min_size_compression Data packet size that PPP decides is big enough
to start compression. Data packets smaller than
that will not be compressed. Default:
256
receive_acc_map Determines whether the system will use the
asynchronous control character map to filter out
incoming data. Default:
FFFFFFFF
reset_mode_compression Determines how often PPP examines packets to
decide when to renegotiate the optimum
compression algorithm. Default:
AUTO
transmit_acc_map Determines whether the system will use the
asynchronous control character map to filter out
outgoing data. Default:
FFFFFFFF