User manual

108
ipx_wan Protocol used when two IPX nets wish to negotiate
the IPX net number for the WAN connection. Both
ends of the WAN connection must enable this
protocol for it to work. Default is
DISABLED
.
MTU Maximum Transfer Unit - largest data packet size
allowed.
network_service Type of network service. Default is PPP.
range_appletalk_
address
For AppleTalk connection, address range of the
remote net. Format is sss-eee: sss is the start address,
eee the end address. The start address can be 0 only if
the end address also is 0. Start and end addresses
ranges are 1-65280. Start address must be less than or
equal to end address.
remote_IP_address For a client IP connection, address assigned to client.
rip Selects either RIPV1 or RIPV2.
rip_authentication Authorizes RIP updates using a stored password.
Maximum string length: 64 characters.
rip_policies_update Allows user to enable or disable RIP policies. See
text on the preceding page for description of
keywords. A keyword with a NO_ in front is used to
disable the policy. The default is indicated by (
D
).
SEND_DEFAULT/NO_SEND_DEFAULT(
D
)
SEND_ROUTES(
D
)/NO_SEND_ROUTES
SEND_SUBNETS/NO_SEND_SUBNETS(
D
)
ACCEPT_DEFAULT/NO_ACCEPT_DEFAULT(
D
)
SPLIT_HORIZON(
D
)/NO_SPLIT_HORIZON
POISON_REVERSE(
D
)/NO_POISON_REVERSE
FLASH_UPDATE(
D
)/NO_FLASH_UPDATE
SEND_COMPAT(
D
)/NO_RIPV1_SEND
RIPV1_RECEIVE(
D
)/NO_RIPV1_RECEIVE
RIPV2_RECEIVE(
D
)/NO_RIPV2_RECEIVE
SILENT (default is disabled)
send_password
Password sent to the remote network. Limit:
15
characters.
spoofing Sets spoofing across the remote connection to save
overhead on a dial-out line. Default is
DISABLED
.