User manual

102
Parameters Description
<user_name> Name of user, previously defined using add user. Limit:
32
characters.
alternate_phone_
number
Number to dial if the first number is busy. Limit: 64
characters.
expiration Date after which this user becomes inactive. The format
is: DD-MMM-[YY]YY. Month is the first 3 letters of
the month. Year is either 2 or 4 digits - 96 or 1996.
idle_timeout Interval to wait before timing out an inactive
connection. Default:
0
seconds.
input_filter Designation of the filter file in FLASH memory to be
applied to the input datastream.
message
Message presented a dial-in user. Limit:
64
characters.
modem_group Modem group used to make the connection.
output_filter Name of the filter file in FLASH memory to be applied
to the output datastream.
password
User’s password, up to
15
ASCII characters. Value is
required.
phone_number Primary phone number to make the connection. Limit:
64 characters.
session_timeout
Interval before timing out a session. Default:
0
(no
setting)
type Type of user added. A user may be one or more types.
• Login
users are TCP users who use the
login_service specified.
• Network
users are framed protocol users, who
use the network_service specified.
• Callback
users disconnected after authentication
and called back.
• Dialout
users are either modem sharing users or
WAN connection users.
• Manage
users with system administration
authority.