User manual

Network Dial In Access 5-

Configuring an IP User

To configure an IP user:

Step 1 - Add the User

Create a standard network user, specifying the user's password,

type, and default network service. Use the following command:

add user

<name>

password

type

[network | login | callback]

network_service

[slip | ppp]

Password

Unique user password.

Type

A network user type can be one of the following:

• network

• network,login

• network,callback

• network,login,callback

Network Service

IP users can use either SLIP or PPP as their remote access

protocol. Choose one of the following:

slip SLIP (Serial Line IP) provides remote access

support for IP only

ppp PPP (Point-to-Point Protocol) provides

remote access support for IP and IPX