User manual

5-6 Network Dial In Acces
s
Configuring Address Pools
If you want network users to be assigned an IP or IPX address
from a pool each time they connect, you must configure address
pools on the NETServer.
Configuring an IP Address Pool
To configure an IP address pool:
1.
Set the initial pool address:
set ip system initial_pool_address
<ip_address>
2.
Set the number of pool members. The maximum is 8 or 16,
depending on the number of ports your NETServer has.
set ip system pool_members
<number>
For example:
set ip system init 195.221.15.112 pool 16
Configuring an IPX Address Pool
To configure an IPX address pool:
1.
Set the initial pool address:
set ipx system initial_pool_address
<ipx_address>
2.
Set the number of pool members. The maximum is 8 or 16,
depending on the number of ports your NETServer has.
set ipx system pool_members
<number>
For example:
set ipx system init 100 pool 16