User manual

IP Terminal Server Setup 4-

Step 2 - Configure Login User Parameters

Use the following command:

set login user

<name>

host_type

[prompt | select | specified]

login_host_ip_address

<ip_address>

login_service

[rlogin | telnet | cleartcp]

tcp_port

<port_number>

terminal_type

Host Type

Determines how the user is connected to a login host. The

default is select.

prompt If the user is prompted, this setting overrides

the login service setting. At the prompt, the

user can enter the login service (for example,

Telnet) and the host name or address, or

"connect" and the host name or address to

use the default login service

select (Default) The user is automatically connected

to the host defined in the Login Hosts Table.

The method of selecting the host is set using

the set connection command (RANDOM or

ROUND ROBIN).

specified The user is connected to the host specified in

the login_host_ip_address setting

If the login user's host type is specified, you must enter the IP

address for the host to which they will connect.

Specifies the default login service. See Step 1 for details.