User manual

4-2 IP Terminal Server Setup
Configuring the Remote Computer
Remote terminal users are known as login users in the
NETServer system. The NETServer system administrator should
provide the remote login user with the following information:
• A user name and password
• A telephone number for the NETServer
• Login host address or name
The remote computer should be configured for the following
communications parameters:
• 8 bits, no parity, and 1 stop bit
• Hardware (RTS/CTS) flow control
• Normal Carrier Detect
Note: These settings are the defaults. If you change the
NETServer's communications settings, you must provide the
remote user with the appropriate settings as well. See the CLI
Reference Guide for more information.