User manual

2-40 Basic Installation and Setup
Network example:
add user predator password aliens type manage,network
Login example:
add user predator password aliens type manage,login
2
. Save your work.
save all
Manually Configuring the WAN Interface
Setting up a protocol over the WAN begins by creating and
editing a user profile. With the user profile you can specify the
call type, protocols, addresses, and bandwidth management
parameters that determine how you connect and communicate
to that user (remote site) over the WAN.
User profiles are detailed in chapters 4-7.
When you save user profiles you’ve just created, you’re finished
configuring the NETServer side of the link. Configuration of the
router on the remote side of the link will vary with your
product, but set up will include the local NETServer IP address.
See your product manual for more information.