User manual

2-24 Basic Installation and Setup
>>> What metric should be applied to the default gateway [1]?
___
>>> Do you want to configure DNS for this Netserver [yes]?
>>> What is the address of the main DNS server for this
Netserver [ ]?
________
>>> What is the default DNS domain name for this Netserver
[ ] ? _____________
You can either assign each user his or her own address or you
can set aside a pool of addresses for dynamic allocation.
>>>Do you want to set up an address pool [yes]? __
The address pool is a continuous range of addresses.
>>>What is the initial address in the pool []? __________
>>>How many addresses should be in the pool [16]? ______
It is possible to restrict access to the TFTP server to a specific
system or a list of systems. Quick Setup will allow you to enter
one system that is allowed or allow all systems access.
>>>Do you want to allow all systems to access the TFTP server
[no]?___
>>>From what IP address will you allow access to your TFTP
network server [ ]? __________
IP setup is completed.
Quick Setup IPX information
The network name is used by the NETServer to identify your IPX
network
>>> Enter the name of your network [ipx]: ____________
The network number is a non-zero hexadecimal number of up to
8 digits.
>>> Enter the ipx network number [ ]:____________