User manual

Basic Installation and Setup 2-2
3
>>> Would you like to set up radius authentication [yes]?__
>>> Enter the IP address of the primary radius authentication
server [
n.n.n.n
]? ___________
>>> What is the shared secret with this server []? _______
Quick Setup IP information
The NETServer uses a network name to identify the network for
future management commands.
>>> Enter the network name of your IP network [ip]: _______
>>> Enter the IP address for the NETServer [ ]:____________
The IP mask can be specified as a class ("A", "B", or "C"), the
number of one bits in the mask, or as an address in the format
255.x.x.x
>>> What should the mask be set to [C]? __
You need to specify the framing for the IP network. It should be
either "ethernet_ii" or "snap".
>>> What is the framing for the IP network [ethernet_ii]? ___
>>>Do you want to set up a default gateway [yes]? __
The default gateway gives the address of a router that the
NETServer will forward packets to when it has no other route to
their destination. It cannot be the same address as the IP
address for the NETServer.
>>> Enter the IP address of the default gateway [ ] ?
____________
The metric or "hop count" tells the NETServer how far the
default router is from the NETServer.