User manual

2-22 Basic Installation and Setup
>>> What SNMP community will manage this system [public]?
____________
Along with a community name, you need to give the IP address
of the system using that community. "0.0.0.0" means any
system.
>>> What is the address of the station for this community
[0.0.0.0]? ____________
You also need to specify if this community can only read
information, or read and write information.
>>> Can this community change management information [yes]?
__
>>> Do you want to allow command line management via
TELNET [yes]? __
For TELNET management of the system you need to create a
user name and password to control access.
>>> What user name will be allowed to manage this system
[administrator]? ____________
>>> What password will be used for this user [ ]?___________
>>> Do you want to set up the syslog daemon [no]? ___
>>> What is the ip address of the syslog []? ____________
What level of information do you want logged to the syslog?
It must be one of the following: "common", "unusual", "critical".
>>> What level of logging do you want [unusual]? _________
>>> Would you like to set up radius accounting [no]? ___
>>> Enter the IP address of the primary radius accounting
server []?
n.n.n.n