User manual

Basic Installation and Setup 2-21
Do you want to continue with NETServer Quick Setup?__
There are two ways to proceed: You can set up only the basic
configuration, which will allow you to continue with the Windows-
based Access Manager. Or you can configure a simple
configuration for both the LAN and WAN of IP, IPX, and
AppleTalk.
Do you want to configure only enough to use the GUI based
system [yes]?___
Please answer the following questions with "yes" or "no" to
indicate which portions of the system you want to configure.
When Quick Setup displays a question it will display a default
answer in square brackets, like "[yes]". If you simply press enter,
this is the answer that will be used for you.
Network management [yes]? __
IP [yes]? __
IPX [no]? ___
AppleTalk [no]? ___
Quick Setup Identification information
>>> Enter the name of your system [ ]: ____________
>>> Who is the system contact person [ ]?____________
>>> Where is this system located [ ]?____________
Quick Setup Management information
You can set up your system to require a user to log in via the
console or leave it so that the console is always in command line
mode.
>>> Do you want a log in required at the console [no]? ___
>>> Do you want to be able to manage the system via SNMP
[yes]? __
An SNMP community names a group of systems that can
manage your system via SNMP. It is a rudimentary form of
security.