User manual

Basic Installation and Setup 2-1
9
Note: You may want to install a line noise filter/surge protector
between the power source and the NETServer. This protects the
NETServer and the data stored in it.
Setup to Talk to the NETServer 8/16 Plus
1
Attach the provided serial cable to the Console port. See
Figure 8 below.
Figure 8. Console/null modem cable connection
2
If you want to dial into the Console port, attach a modem
directly to the other end of the serial cable. Otherwise, use
the provided null modem adapter to attach the serial cable
to a PC or terminal.
3
If you connected the serial cable or modem to a PC rather
than a terminal, run a communications package or terminal
emulator (such as Windows Terminal) on the PC. Configure