User manual

2-10 Basic Installation and Setup
platform you’re using, you may need to modify a configuration
file for VT100 settings.
Automated Quick Setup Programs
As an alternative to the manual configuration described in this
manual, NETServer Plus offers two easy, automated
configuration programs (described below) to quickly and
efficiently get your unit up and running.
NETServer Manager Plus Setup Wizard
A Setup Wizard is built into our Windows-based NETServer
Manager Plus (NMP) which can be accessed remotely (without
hooking up the console port) and doesn’t require using the
Command Line Interface (CLI). We recommend this program
for its graphical user interface and means of configuring your
unit via SNMP. See the AM pamphlet for easy setup.
Quick Setup (CLI)
NETServer 8/16 Plus' automated Quick Setup program provides
user-friendly configuration on the CLI. It performs simple setup
for your entire system or for individual sections. Simply answer
the mostly yes or no queries and the program does the rest. It is
accessed automatically upon installing your hardware and
turning on the NETServer. If you prefer, you have the option to
start configuration in Quick Setup and continue in the AM.
Note: The Quick Setup (CLI) program is designed only for initial
setup of the NETServer. When setup is complete, this one-time
program will alter your configuration files, which the program
cannot edit. If you make an error and need to restart, use the
delete configuration command to reboot and return to factory-
configured defaults.
Advanced Management Capabilities
You may also download upgraded code to your NETServer
using the PCSDL program. See the Performing a Software
Download section in Chapter 9: Administrative Tools for more