User manual

Basic Installation and Setup 2-1
Chapter 2
Basic Installation and Setup
This chapter describes what to do now that you are acquainted
with NETServer 8/16 Plus functionality. Read the following
sections appropriate to your unit and skip the rest.
What’s in the Package
The following checklist itemizes what you need before you can
use NETServer 8/16 Plus. At installation, it is assumed the
checklist was completed, so, check off the items now. It will
make your installation and set up process easier and quicker.
❑ Inspect the contents of the NETServer 8/16 Plus package.
❑ Obtain an Ethernet connection on your LAN.
❑ Obtain a terminal emulator over the serial port on your PC.
Checklist
❑ NETServer 8/16 Plus V.34 or I-modem (8 or 16-port unit)
❑ Console cable (RJ45 - RS232)
❑ 4/8 I-modem cables (RJ45 - RJ45) - I-modem unit only
❑ Null modem adapter
❑ Power cord
❑ Mounting brackets, screws and rubber feet
❑ Getting Started with NETServer 8/16 Plus card
❑ NETServer 8/16 Plus User Manual