User manual

E-16 RADIUS Authentication and Accountin

Idle-Timeout

Sets the maximum time (in seconds) that a connection can be

idle before the session is automatically terminated.

Values Decimal value

Default 300

Use the following command to set this parameter locally:

set user

<name>

idle_timeout

NETServer-Specific Parameters

This section describes the NETServer-specific authentication

parameters that you can enter for a user in the RADIUS

database. These parameters directly correspond to parameters

supported by the NETServer software.

Note: Since RADIUS is an open standard, there are many

RADIUS server implementations available. The parameters

described in this section may not be available depending on

your RADIUS server implementation.

Max-Channels

Specifies the maximum number of channels that can be used for

a LAN-to-LAN connection. Specifying one channel disables

multilink PPP.

Values integer (1 or 2)

Default 1

Use the following command to set this parameter locally:

set network user

<name>

ppp max_channels