User manual

RADIUS Authentication and Accounting E-1
5
Note: If the connection is configured to use the assigned
addresses, or if the address is negotiated, and you set the
destination to 0.0.0.0, the NETServer will “learn” the gateway to
reach the host or network.
Values ASCII string (maximum 253 characters)
Default NULL
Use the following command to set this parameter locally:
add framed_route user <user>
ip_route <ip_name or address>
gateway <ip_name or address>
metric <number>
Framed-IPX-Network
Indicates the IPX network number configured for the user.
Values Hexadecimal value
Default 00000000
The default value of 0 or 0xFFFFFFFE causes the server to pick
an address from the pool of available IPX addresses.
Use the following command to set this parameter locally:
set network user <name> ipx_address <ipx_addr>
Note: You can enter '0' in the ip_address field to cause the
NETServer to pick an IPX address from a pool of available
addresses. The value '0xFFFFFFFE' is not a valid entry.
Session-Timeout
Sets the maximum time (in seconds) of service provided to the
user before the session is automatically terminated.
Values Decimal value
Default 0
Use the following command to set this parameter locally:
set user <name> session_timeout <seconds>