User manual

E-8 RADIUS Authentication and Accountin
g
Framed-User
The CLI calls this a Network user. Once the user ID and
password are authenticated, users are connected to the network
using the network service (PPP or SLIP) specified in RADIUS or
in the local user table.
Note: RADIUS does not support ARAP users. You must
authenticate and define configuration parameters for these users
in the local user table.
A Framed-User entry must contain:
• User-Name
• User-Password
• Service-Type
• Framed-Protocol
(not necessary if the user wants the default user setting)
For example:
daver User-Password=“antietem”,
Service-type=Framed-User,
Framed-Protocol=PPP
Dialback-Framed-User
The CLI defines this user type as two separate user types:
Network and Callback. When a user ID and password are
authenticated by RADIUS, the NETServer disconnects and dials
the user back, using a pre-defined telephone number. Once this
connection is made, users are connected via a framed protocol
service to the host or network specified in RADIUS or in the
local user table.
A Dialback-Framed-User entry must contain:
• User-Name
• User-Password
• Service-Type
• Framed-Protocol
(not necessary if the user wants the default user setting)
• Dialback-No