User manual

RADIUS Authentication and Accounting E-

The CLI also calls this a Login user. Once the user name and

password are authenticated, this user is connected via a login

service to the host or network specified in RADIUS or in the

local user table.

At a minimum, a Login-User entry must contain:

• User-Name

• User-Password

• Service-Type

For example:

annab User-Password=“dkt902d”

Service-Type=Login-User

Dialback-Login-User

The CLI defines this user type as two separate user types: Login

and Callback. When a user ID and password are authenticated

by RADIUS, the NETServer disconnects and dials users back,

using a pre-defined telephone number. Once this connection is

made, users are connected via a login service to the host or

network specified in their profile.

A Dialback-Login-User entry must contain:

• User-Name

• User-Password

• Service-Type

• Dialback-No

For example:

cindyg User-Password=“billthecat”,

Service-Type=Dialback-Login-User,

Dialback-No=“19195551234”