User manual

E-4 RADIUS Authentication and Accountin
g
RADIUS Security Server User Table Entries
RADIUS user table entries are stored in the RADIUS security
server database. A user table entry must contain required
parameters such as the user's name, password, and service type.
In addition, you can enter optional parameters such as protocol,
address, and session parameters.
This section briefly describes how to format the entries
commonly used with the NETServer in the RADIUS database.
For specific, detailed instructions on setting up a user table entry
in the version of the RADIUS security server that you decide to
use, refer to your RADIUS documentation.
RADIUS user table entries consist of:
• Required parameters
• Optional parameters
• U.S. Robotics-specific parameters
Note: Most RADIUS user table parameters have a
corresponding parameter in the NETServer's local user table.
Each RADIUS parameter described in this chapter also includes
the corresponding CLI command used to set the parameter
locally. Be aware that any parameter set via RADIUS exists only
for the duration of the session.
Required Parameters
At a minimum, a RADIUS User Table entry must contain the
following information:
• User-Name - name of the user
• User-Password - password for the user
• Service-Type - type of user (such as login, dialback, etc.)