User manual

D-12 Event Message
s
"The configuration file <filename> is corrupt. Status <error status>."
Meaning: The Configuration file has been corrupted. It will
be renamed to <filename>.bad
Action: Keep a copy of the <filename>.bad file. If the file
was uploaded to using TFTP, upload the file
again making sure the TFTP transfer mode is set
to octet
"Could not create a list for CFM Control Structures. Status: <error status>."
Meaning: The Configuration File Manager could not
allocate the resources necessary for normal
operation
Action: Reboot the system
Telnet Messages
"CIP_GET_SHARED_DEV_REQ failed: no modems available"
Meaning: A user is attempting to Telnet to the NETServer to
perform modem sharing, but there are no free
modems available for the group defined
Action: Use the list service command to see which
modem group is configured. Determine why all
modems in the modem group are being used
"User X attempted CLI access without dial-out privileges. \n"
Meaning: A user is attempting to Telnet to the NETServer to
perform modem sharing using a valid username
and password, but the user profile does not have
dialout enabled
Action: Use the set user <name> type dial_out command
to enable dialout privileges for the user